Stid ultrys - Information; Pc Requirements; Usb Key Content; Hardware Required

To Next Page

To Previous Page

1. Information

PC requirements

• A PC with operating system: Windows 7 or 10 or Windows server 2012r2.

• USB communication port.

• 50 MB min of free disk space.

USB Key Content

• FTDI USB Driver for Windows 7, 8.x and 10.

• ULTRYS Version 3.x.x.

Hardware required

To configure the reader:

• USB cable provided with SLA and SMA to directly configure the reader via USB

link.

• STid UHF 866-915 MHZ encoder to encode UHF SCB/OCB configuration card:

Part number:

- ARC-Wx5-G/U04-5AA/1

- STR-Wx5-E/U04-5AA/1 (v10 firmware version required*)

- GAD-Wx5-E/U04-5AA/1 (v08 firmware version required*)

• UHF ISO card part number: CCTW630_AP (ISO card UHF – Broadband- Quanray QS-

5AE 64K).

To encode user credentials and vehicle tags:

STid UHF 866-915 MHz encoder, part number:

- ARC-Wx5-G/U04-5AA/1

- STR-Wx5-E/U04-5AA/1 (v10 firmware version required*)

- GAD-Wx5-E/U04-5AA/1 (v08 firmware version required*)

*Identification on the back of the encoder.