Stid ultrys - Reader Configuration Spectre Atx4 Osdp; Ultrys Settings

244
SPECTRE ATX 4 OSDP
TM
© STid – MU_ULTRYS_V3.0.1_EN
10. Reader configuration SPECTRE ATX4 OSDP™
10-1 ULTRYS settings
➢ Connect the SPECTRE ATX4 reader to the PC using the provided USB cable to load the
configuration via serial link directly onto the reader.
or
➢ Connect an UHF encoder to the PC to load the configuration onto UHF OCB
configuration card.