Step 6- Light and sound indicator setting
Default LED:
After the reader initialization phase, the LED must be activated according to the color
defined in the box.
The intensity of the LED is adjustable in 10% steps (from 10% to 100%).
Reading error:
This LED lights when the RF is bad, in this case the reader can’t read the tag.
The intensity of the LED is adjustable in 10% steps (from 10% to 100%).
User ID upload:
LED: Color indicating the detection of an identifier by the antenna.
The intensity of the LED is adjustable in 10% steps (from 10% to 100%).
Buzzer: OFF or ON+option :
To Next Page
Loading...