Stid ultrys - Step 5- Installation Configuration with SPECTRE Antenna

22
© STid – MU_ULTRYS_V3.0_EN
SPECTRE READ ONLY
Step 5- Installation configuration with SPECTRE Antenna
Name the lane
Maximum 10 characters.
For example, Entry1.
Add / Delete lane
Use ‘Add /Delete lane’ to configure the number of lanes you will use in your application.
The default setting is one antenna on the first lane.
For more information about the possible combination please refer to the document
NA_SPECTRE.
1
2
3
4
6
5
7
1
2
3