Stid ultrys - Create New Configuration

196
SPECTRE ATX OSDP
TM
© STid – MU_ULTRYS_V3.0.1_EN
8-2 Create new configuration
The reader configuration is done in 7 steps. To move from one stage to another, you must click
on “Next”.
UHF frequency band regulation
Configuration protection loaded into the
reader
Reader configuration
Step 4 does not exist in the SPECTRE ATX OSDP™ configuration wizard
Installation configuration
Step 6 does not exist in the SPECTRE ATX OSDP ™ configuration wizard
Reading & communication parameters
User Security Roles
Configuration save and protect