With USB reader connection
3- Connect the reader via USB cable provided.
Configure the communication parameters.
4- Select the Connect your reader.
6- Click on Confirm.
Message: NOK
- Check the USB cable
- Check the communication with reader
With reader’s number reference
Enter the first 6 characters of your reader’s
reference number
Examples: SNAW43, SNAW53
Message: NOK
Check your reader’s reference number
Step 4- Antenna selection
The SPECTER NANO reader works with an integrated antenna.
Step 4 does not exist in the SPECTER OSDP™ setup wizard.
To Next Page
Loading...