Notes:
• Only UHF tags compatible with “
FAST ID”
feature
and having at least 128 bits of EPC
can be decrypted and authenticated by the SPECTRE Access reader.
The chips compatible with secure encoding are: Monza X, Monza R6P, Monza 4D, this
chip is present into
- TLTA-W53M-943_S
- TLTA-W75B-943_S
- IronTag Aero
- CCTW490_AN
• The secure mode is not accessible if an EPC mask has been set in ‘Advanced
settings’.
Note: After setting an EPC security key, if you return to step 5 with the Previous
button, and you set an EPC filter, then returning to step 7, the "EPC ID Security"
checkmark is displayed. in gray, the key field is still accessible but not taken into
account
Output protocol selection
The advanced options in this part depend on whether or not a Bluetooth® configuration is
activated and the protocol chosen:
To Next Page
Loading...