Stid ultrys - Page 83

83
SPECTRE NANO READ ONLY
© STid – MU_ULTRYS_V3.0.1_EN
Bluetooth® configuration is done in 4 steps. To move from one Step to another you must click
on "Next".
Selecting the Bluetooth® configuration:
- Load a Bluetooth® configuration
- Open my current Bluetooth® configuration
Name / Reading mode / Bluetooth® Reading mode / Security
Identification mode / Reader options
Virtual access card parameters
Step 1: Load a Bluetooth
®
configuration (.pse)
Warning: if a Bluetooth®
configuration is already
defined, loading a SECard
(.pse) file will erase the
current settings.
1- Click on ‘Load a
Bluetooth
®
configuration’