18 MS 461, MS 461-R
Attach the springs at the side with
the raised hexagon (arrow).
– Clamp the clutch in a vise – one
clutch shoe horizontal as shown.
: Attach one end of each spring (1)
to the clutch shoes.
: Use the hook (2) 5910 890 2800
to attach the other ends of the
springs and press them firmly into
the clutch shoes.
– Check the clutch – all springs
must be properly attached.
The washer (1) must be in place
and the word "TOP" (arrow) must
face outwards.
off
off
5902RA012 TG
1
2
TOP
1
3443RA049 TG
: Position the clutch (1) on the
crankshaft stub so that the raised
hexagon (arrow) faces outwards.
: Fit the clutch (1) and tighten it
down firmly – left-hand thread.
– Remove the locking strip from the
cylinder.
– Install the rim sprocket and clutch
drum.
– Fit the spark plug and tighten it
down firmly.
– Fit the boot on the spark plug.
– Fit the air baffle.
– Fit the filter cover.
TOP
1
3443RA050 TG
To Next Page
Loading...
