Stonex S10 GNSS Receiver – User Manual 27
FEC (forward error corrector): used primarily with radio protocol
Satel. Introduces the information that make more "robust" the radio
message, making it less susceptible to interference.
Scrambler: used mainly with Satel protocol.
Area: makes the receiver fully complaint with the rules of the
geographical area . Use the "SAVE" button in the lower part of the
screen to save the configuration.
5.3.2. Option Network
The Network option is used to set the configuration parameters of the 3G
GPRS network connection, such as the type of connection you want to run (eg
NTRIP, CSD). NTRIP requires to input APN, Caster Address, Port number,
Mount Point, user ID and password of the provider of differential corrections.
CSD option allows to enter the phone number of the SIM card inserted in the
receiver used as a "base", which will connect to the rover (direct call function
base-rover).
This feature allows to connect the base and rover through the GSM/ UMTS
data link, and it is useful when NTRIP server is not available.
Auto Connect option, visible at the bottom of the page, activates the auto-
connection of the modem to the UMTS/GSM network in automatic after
“power on” of the instrument, without requesting any user action.
To Next Page
Loading...
