Stonex S10 GNSS Receiver – User Manual 44
Appendix 2: Default Radio Settings
S10 uses a single UHF radio to cover the different whole band 410-470 MHZ.
Default values are set directly from STONEX® in according to the following
tables:
Appendix 3: Frequently Asked Questions
1. The receiver is set in static mode but it does not save data even if more than
three satellites are locked. The three red lights are blinking.
Solution: the internal memory of receiver is full, some files must be deleted.
2. The external and built-in power lights are blinking but no corrections is
received.
Solution: The activation code of the GPS expired; please contact STONEX®
for a new code.
3. No success connecting the controller and the GPS via Bluetooth.
Solution: the receiver has a different working mode with respect to the menu
of the controller, switch the mode. If the problem persists, contact STONEX®.
To Next Page
Loading...
