STONEX S10 - Technical Specifications

Stonex S10 GNSS Receiver – User Manual 46
Appendix 4: Technical Specifications
RECEIVER
Channels
220
Satellite Tracked
GPS: Simultaneous L1 C/A, L2C, L2E, L5
GLONASS: Simultaneous L1 C/A, L1P, L2 C/A,
L2P, L3
SBAS: Simultaneous L1 C/A, L5
GALILEO Simultaneous E1, E5A, E5B (reserved)
BeiDou 2 / COMPASS: B1, B2
Position Rate
Up to 50 Hz
Signal Reacquisition
< 1 sec
RTK Signal Initialization
Typically < 10 s
Hot Start
Typically < 15 s
Initialization Reliability
> 99.9 %
Internal Memory
4 GB (Over 45 days of raw static data storage
with recording sample every 1 second)
Micro SD Card
Expansion slot with 4 GB internal memory (32
GB optional)
POSITIONING
1
HIGH PRECISION STATIC SURVEYING (Long Time Observations)
Horizontal
2.5 mm + 0.3 ppm RMS
Vertical
5 mm + 0.5 ppm RMS
CODE DIFFERENTIAL POSITIONING
Horizontal
0.25 m + 1 ppm RMS
Vertical
0.45 m + 1 ppm RMS
SBAS POSITIONING (Typical)
Horizontal
0.5 m RMS
2
Vertical
0.85 m RMS
2
REAL TIME KINEMATIC (< 30 Km) – NETWORK SURVEYING
3
Fixed RTK Horizontal
8 mm + 0.8 ppm RMS
Fixed RTK Vertical
15 mm + 1 ppm RMS
INCLINED POSITIONING (2 m POLE)
10° inclination
20 mm RMS
20° inclination
30 mm RMS
30° inclination
50 mm RMS
COMMUNICATION
Connectors I/O
7-pins Lemo and 5-pins Lemo interfaces.
Multifunction cable with USB interface for
PC connection
Bluetooth device
2.4 GHz class II
Wi-Fi
IEEE 802.11 b/g/n