Stonex S10 GNSS Receiver – User Manual 31
5.4.3. Option External
To connect external radio. It is possible to select the baud rate of the
connection between the instrument and the UHF radio. The other options
were discussed previously.
The SAVE button allows you to save the setting.
5.5. Device configuration
Fig 5.10 Configuration
From this menu, the User can select the language used by the WebUI, the
'time’ compared to the meridian GMT, toggle the "speaker", select the
memory to save the raw data (internal memory or SD card), set the size of the
time zone, change the refresh rate of the sensors. Other advanced functions
such as direct connection to the internal modules OEM (for experts only) can
be set with this menu
Use the SAVE button to save the configuration.
To Next Page
Loading...
