Stonex S980A GNSS Receiver – User Manual v1.0
16
If you select Network, it appears the specific options of the network
configuration. The user can type and set the parameters of the Caster Service
and the respective User and Password if it used a NTRIP connection. Through
the Web UI is possible to download the list of the mountpoints, the user can
choose the mountpoint according to the service and then start the connection.
If the user uses a SIM card is necessary type the APN and eventually user and
password.
If the user wants to use SIM card inside the receiver, it is suggested to disable
the PIN code before the application.
To Next Page
Loading...
