STONEX S980A - Page 8

Stonex S980A GNSS Receiver – User Manual v1.0
7
2. Datalink indicator
• Green: datalink setting succeeds
• Flashing green: data in normal
transmission/reception
• Flashing green/blue: in rover mode, data in
normal trasmission/reception and record
raw data enable
• Blue: working mode static but not
recording
• Flashing blue: in static mode, flashing blue
according to static sampling interval
3. Power indicator
• Green: the power supply in 30%-100%
• Flashing green: power in 10%-30%
• Flashing red: power<10% with warning
beep
4. Bluetooth indicator
• Blue: Bluetooth is connected
• Off: No connection
5. PPS indicator
• Green: 1 PPS output enabled but no output
• Flashing Green: 1PPS output enabled and
data outputs
• Off: 1 PPS output disabled
6. Sensor Fusion indicator
• Green: Sensor fusion is enabled and could
be output without any problems
• Off: Sensor fusion is disabled
7. LCD Display touch
• 1.45 inches touch LCD screen for interface
display and operation settings
8. Power button
• Switch ON/OFF the receiver.
• Short press to broadcast the current
operation mode and status