Stratasys Objet24 V2 - Clear Space above the Printer

Objet Desktop 3-D Printer Site Preparation Guide
DOC-04002 11 Rev. D2
Ifyourspecificworkareadoesnotmeetthisminimumfloorplan,consult
withcustomersupporttoconsiderotherpossiblearrangements.
Thesys
temshouldnotbelocatednearheavymachin
ery(suchas
generators)thatmaycauseelectricalinterferenceorhighvibrationlevels.
Thesystemshouldbeprotectedfromsprinklersorpipescarryingliqu
ids
abovethesystem.Similarly,donotplaceaWaterJet(usedforcleaning
models)within5meters(16feet)oftheprinter.
Theserverworkstat
ionmustbelocatedwithin5meters(16feet)ofthe
printer.Themonitor,keyboardandmouseoftheworkstationareshared
withtheprintercomputer(thekeyboardandthemousemustbeUSB‐type
devices).
Shelvesandcabinetsmaybelocatedinthevicinityoftheprintertoallow
conven
ientstorageoftools,parts,accessories,manualsandcontainersor
model/supportmaterial.
4.2 Table Height & Strength
Theheightofthetableshouldbe62–72cm(2feetto2feet,4inches).This
establishesaworkingheightof100–110cm(2feet,3inchesto
2feet,7inches).
Thestand/tablemustbecapableofcarryingaloadofatleast100kg
(220
lb).Fortheweightoftheprinter,refertoTa
ble1,“Printersizeand
weight,”onpage6.
Thestand/tablemustbelevel.
4.3 Clear Space Above the Printer
Aclearanceof60cm(2feet)mustbemaintainedabovetheprinterto
providespaceforopeningthetopcoverandforservicing.
The temperature requirements for material storage are stated in Section 5.11.1,
Storage and Transport Conditions on page 18.
Warning:
Four (4) people are required to lift the printer onto the table.