Stratasys Objet24 V2 - 3 Shipment and Delivery; Shipping Information and Responsibility; Shipping Pallets; Equipment

Objet Desktop 3-D Printer Site Preparation Guide
DOC-04002 8 Rev. D2
3 Shipment and Delivery
3.1 Shipping Information and Responsibility
TheStratasysdistributor will arrangeshipmenttothecustomer’sfacilities,as
indicatedinthe“shipto”partoftheinvoice.Itisthecustomer’s
responsibilitytoprovidethedistributorwithdetaileddelivery
instructions.Thecustomerisresponsiblefortransportingthesystemtoa
suitablypreparedinstallationsite.Stratasys-‐certified Customer Support
Engineerswilladv
isethecustomeronsitepreparation,uponre
quest.
3.2 Shipping Pallets
Theprinterarrivesonawoodenpallet.Thepallet’sapproximatesizeand
weightappearinthefollowingtable:
3.3 Equipment
Itisrecommendedthatahandpallettruckwiththefollowing
specificationsisavailableforprinterinstallation:
•Capableofli
fting100kg(220lb)
•A100‐
centimeter(40‐inch)extension
Caution:
Equipment should be unpacked and installed by authorized Customer Support
Engineers only.
W × H × D (cm) W × H × D (inch) Weight (kg/lb)
104 × 87 × 79 41 × 34.25 × 31 93 kg / 205 lb
Table 2: Shipping pallet size and weight
W = Width; H = Height; D = Depth.