Stratasys Objet24 V2 - 2 Physical Description; Configuration; Size and Weight; Start-Up Kit

Objet Desktop 3-D Printer Site Preparation Guide
DOC-04002 6 Rev. D2
2 Physical Description
2.1 Configuration
TheObjet3‐Dprintingsystemconsistsofthefollowingmaincomponents:
•Theprinter
•Theprintercomputer(builtintotheprinter)
•Aprinter‐serverworkstat
ion(computerprovidedbythecustomer)
Figure 2–1 Objet 3-D printer
2.2 Size and Weight
Thefollowingtableshowsthesizeandweightinformationfortheprinter.
2.3 Start-Up Kit
Theprintercomesequippedwithastart‐upkit,whichincludestoolsand
accessories.Thesetoolsandaccessoriesmayberequiredduringthe
installationandareavailableforusebythecustomer.
W × H × D (cm) W × H × D (inch) Weight (kg/lb)
82.6 × 60 × 62 32.5 × 23.6 × 24.4 83 kg / 183 lb
Table 1: Printer size and weight
• W = Width; H = Height; D = Depth
• The weight of the printer does not include printing materials.