Stratasys Objet24 V2 - Doors and Hallways

Objet Desktop 3-D Printer Site Preparation Guide
DOC-04002 12 Rev. D2
4.4 Doors and Hallways
Aminimumwidthof65cm(2feet,2inches)isrequiredfortheprinterto
passthrough—90cm(3feet)whentheshippingpalletisincluded).
Iftheprintermustbeturned(forexample,toenteradoorway),the
minimumhallwaywidthrequiredis100cm(3feet,
4inches).