Stratasys Objet24 V2 - Noise Level

Objet Desktop 3-D Printer Site Preparation Guide
DOC-04002 7 Rev. D2
Itisrecommendedthatthestart‐upkitbestoredneartheprinter.
Thestart‐upkitincludesthefollowing:
•Custom
erToolkit—Allenkeys,screwdrivers,amirror
,ascraper,a
spatulaandaloupeforregularoperationandmaintenance.The
toolsarekeptinaspecialpouch.
•Consumableitems—wipi
ngcloths,pinkpaper,transparenciesand
soon,tomaintaintheprinterforapproximatelytw
oyears.
•Partsandaccessoriesforemergencymaintenanceoftheprinting
syst
em.
2.4 Noise Level
Thenoiselevelatadistanceof100cm(39.4in)fromallsidesoftheprinter
islowerthan70dBwhileprinting.Impactnoisewasnotfound.