9 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY9 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Wizards
Description
UV Lamp Calibration
• This wizard calibrates the UV lamp intensity.
• Optimum UV intensity ensures that parts are cured properly.
UV Lamp Replacement Run this wizard if you need to replace the printer’s UV lamp.
Wiper Cleaning
This wizard enables you to clean the wiper and surrounding area or to perform
wiper blade replacement.
MRW
• Before producing models using a different type of model material than is
currently installed, you must flush the print block and feed tubes by running
the Material replacement wizard.
• The wizard enables you to select the cartridge(s) and the type of material you
want to install and use.
To Next Page
Loading...
