continue and proceed formatting. Select an action with tu and press OK. Please note that after
formatting all currently stored data will be lost from the device.
Select YELLOW Select: For selecting multiple recordings for further process, highlight the recording
with pq and then press the YELLOW Select button to select the recording. A check mark symbol
appears next to the recording’s name. Repeat the steps to select your recordings for further process.
Delete BLUE Del: For deleting recording(s), highlight the recording which you want to delete with
pq and then press the YELLOW Select button to mark/select the file(s), then press the BLUE Del
button. A confirmation request message pops up for deleting the selected file(s), select the delete or
the cancel option with tu and press OK.
In playback mode the following functions and buttons can be used: 1, OK, 3, 6, 5, 7, 8,
SUBTITLE, TEXT, AUDIO, , GOTO, 0~9, STEP, ZOOM+/ZOOM, !, EXIT.
1: Starts/resumes playback
OK,2: Pauses/resumes playback
3: Stops playback and returns to the recording manager from full screen
playback.
5 6: With 5 6 you can rewind or forward playback in x2, x4, x8, x16 and x32
speed.
7 8: Jump to the previous/next video file.
SUBTITLE: Displays the subtitle selection window, if the recording contains subtitles you
can select the subtitle language to display.
TEXT: If the recording contains TELETEXT, it displays the recorded teletext content.
AUDIO: If the recording contains multiple audio tracks, in the audio selection window
you can select the audio channel/language, with tu.
: Displays information about the recording, the playback time and the
additional function buttons. Press again to remove the information window.
GOTO: Continue playback from the set time, press the RED GOTO button, with
the 0~9 buttons add the playback time 00:00:00 from where you want to
continue the current playback and press OK.
STEP: Press the GREEN Step button to playback step by step.
ZOOM+: Press the YELLOW ZOOM+ during playback to zoom in the video, press again
to zoom deeper, with tupq you can move the picture to which part you
like to display.
ZOOM: Press the BLUE ZOOM- during playback to zoom out in the video, press again
to zoom out.
!: Mutes audio.
EXIT: Exits from the recording manager, returns to the last viewed channel.
*This user manual describes the full functionality including the recording function and may not be applicable if the PVR
software has not yet been installed.
7.3.1.5 Recorder Settings*
In the Recorder Settings menu you can setup the recording and Timeshift modes.
Timeshift mode: PAUSE, AUTO, OFF. Set the Timeshift mode with tu.
PAUSE: In the PAUSE mode, Timeshift can be activated in the channel view mode by
pressing 2.
AUTO: In the AUTO mode, the Timeshift starts immediately in the channel view
mode. If you switch channels the previously timeshifted programme will be deleted and the receiver
25
To Next Page
Loading...
