RAW – audio from receiver will be sent in original digital format to be used in
combination with Home Theatre Sets or Digital Amplifier with Multi Audio capability.
Auto Switch O
Auto Standby is a new, power saving feature that helps you reduce power consumption. It will switch
off the receiver when no command is given for the defined period of time. It is set per default to 3
hours. With the tu buttons you can select between different time intervals or Off for disabling the
feature.
NOTE If there are timers running, the auto standby function will be disabled for
the booked time.
TV Brightness Some adjustment can be made to the brightness of the picture.
TV Contrast Some adjustment can be made to the contrast of the picture.
TV Saturation Some adjustment can be made to the colour saturation of the picture.
These features are useful for analogue TVs, in practice, best left on default 50.
7.2.5.5 Adv Timer (Schedule)
In this menu you can setup the schedule for automatic switching to the defined channels at a
particular date/time. The timer menu can be entered directly from viewing mode by pressing the
BLUE button.
Add: Press OK to add a new booking. In the appearing dialogue select channel
type and number, the starting date and time, end time, repeat cycle mode
(once, daily, weekday, weekend day or weekly) and timer mode (Schedule,
Recorder). Tip: For selecting the channel number you can use the 0 ~ 9
buttons.
When you have entered all parameters, press OK to store your booking.
To edit an existing booking select that booking and press the OK button.
Del: Press the RED button to delete a booking from the list. Press OK to confirm
deleting or EXIT to cancel.
Page Use YELLOW and/or BLUE to jump quickly through your list of bookings.
NOTE You can set timers for programmes directly from the EPG. Please refer to
section 7.2.4 for more details.
7.2.5.6 Parental Control
In this menu you can setup your preferences for Parental Control. (Default Password: 0000)
Menu Lock Use this option to prevent entering the menu and changing settings. The
menu items can only be altered after entering the password.
Channel Lock When set to On, channels marked as Locked in the Channel Editor are indeed
only viewable after entering the password.
Censorship Lock Some Satellite Providers sent an age restriction in their signals. When an age
is selected here, and an age restriction signal higher or equal is received as
20
PART 2 • English
To Next Page
Loading...
