Problem Possible cause What to do
The RCU is not working Battery exhausted
RCU is incorrectly aimed
Change the batteries
Aim RCU at the receiver, or check
that nothing blocks path to the
front panel
No audio, only video Audio is muted on receiver,
audio is muted on TV.
Audio Amplifier is muted.
Scart cable is not inserted
correctly.
Check if audio is muted.
Insert Scart cable properly
Scrambled service
message
Channel is scrambled. Select alternative channel.
The external USB HDD does
not start.
Power consumption is
too high.
Connect an extra power supply
adapter to your USB HDD device.
Password forgotten Contact local Service Hotline or
send email to our support via
www.strong.tv
9.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK
Input symbol rate: DVB-S QPSK: 1 ~ 45 Ms/s
DVB-S2 8PSK/QPSK: 10~30 Ms/s
FEC decoder: Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in 8PSK mode
Video Decoder
Profile level: MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Input rate: Max. 20 Mbit/s
Aspect ratio: 4:3 and 16:9, Pan & Scan, Pillarbox Letterbox, Auto
Video resolution: PAL 50Hz: 576i, 720p, 1080i, 1080p
Audio Decoder
Audio decoding: MPEG-1 Layer 1 & 2, AC3+ Downmix
Audio mode: Mono L/R, Stereo, Dolby® Digital, Dolby® Digital Plus*
Sampling rate: 32, 44.1, 48 kHz
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
28
PART 2 • English
To Next Page
Loading...
