EasyManua.ls Logo

Strong SRT 7004 - Network; Multimedia

Strong SRT 7004
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Select System then factory setting in the main menu and press OK to select. Enter your PIN code or the
DEFAULT PIN: 0000 and press OK to confirm. This option will delete all your channels and settings.
The receiver will reboot and start with the initial Installation menu.
WARNING A factory reset will permanently delete all your personal settings, timers
and stored channels. Please consider this before you perform a factory
reset.
Others
Here you will find some simple convenient items to use.
Calendar Find out quickly what day is a certain date.
Calculator Have quick access to a digital calculator.
Game Select from three games, follow the instructions on screen.
Network
The unit is equipped with a network connection, which can provide weather forecasts and RSS news
reports via an Internet portal. Connect a CAT5 cable (or higher quality) to the Ethernet RJ45 connector
of the unit, and the other end to an existing switch/router/modem which is connected to the
internet. The default setting is Auto (DHCP) for automatically obtaining IPs and DNS. Select Manual in
Network Settings to enter own settings if required. Refer to the manual of your router or modem to
setup properly. The Ping test can be selected to check your connecting, once done.
Weather You can setup several cities to monitor 5-day weather forecast on regular
basis. Up to 4 cities can be monitored around the globe. Select pre-defined
cities or enter your own preference with the RED search button and use
the key-pad to enter. Select the ‘floppy-disk’ symbol to save. Press YELLOW
to save all cities. Delete a city with BLUE, then press YELLOW to save. After
setting up for the first time, exit from the Weather app and enter again to see
the forecasts. Use tu to scroll through the cities. To edit cities again, press
YELLOW.
RSS Feed Enter your own preferred RSS feeds or use the default settings with RED. Start
editing by using the tu buttons and the appearing key-pad. Be sure to save
with the ‘floppy-disk’ symbol. Press OK to connect to a selected feed. Use the
pqtu buttons to scroll through the content.
Note Applications available in our product(s) may change from time to time
and are not guaranteed to work at all times. They are subject to technical,
commercial and/or license related changes.
7.3 Multimedia
NOTE: The back panel USB port is especially adapted for Multimedia.
Press MENU and select Multimedia.
22
PART 2 • English

Related product manuals