TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 3
1.3 Equipment Set-up 4
1.4 Accessories 4
1.5 Usage of external USB devices* 4
2.0 YOUR RECEIVER 5
2.1 Default PIN: 0000 5
2.2 Front panel 5
2.3 Rear panel 5
2.4 Remote Control 5
2.5 Installing the batteries 7
2.6 Using the remote control 7
3.0 CONNECTIONS 7
3.1 Basic connection using a Scart cable 7
3.2 Basic connection using an HDMI cable 7
3.3 Connecting multiple fixed LNBs using a
DiSEqC 1.0/1.1 switch 8
3.4 Connecting to Ethernet 8
4.0 FIRST TIME INSTALLATION 8
4.1 Installation 9
5.0 QUICK GUIDE FOR USING YOUR RECEIVER
9
6.0 OPERATION 10
6.1 Changing channels 10
6.2 Info banner 10
6.3 Selection of audio language 11
6.4 Teletext 11
6.5 Subtitles 11
6.6 EPG (Electronic Programme Guide) 11
6.7 Favourite channels 12
6.8 Instant Recording* 12
6.9 Timeshift* 12
7.0 MAIN MENU 12
7.1 Installation 12
7.2 Channel 15
7.3 Multimedia 22
8.0 TROUBLESHOOTING 26
9.0 SPECIFICATIONS 28
*This user manual describes the full functionality including the recording function and may not be applicable if the PVR
software has not yet been installed.
STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE
2004/108/EC and 73/23/EC, RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications, design and
appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from
Dolby Laboratories. Dolby® and the double-D symbol are registered trademarks of Dolby® Laboratories. All other product
names are trademarks or registered trademarks of their respective owners. © STRONG 2015. All rights reserved.
06 May 2015 18:22
2
PART 2 • English
To Next Page
Loading...
