Strong SRT 8215 User Manual

NOTE: Availability of EPG data depends on broadcast.
6.7 Record, Timeshift and Format*
To use these functions, you must connect a USB memory device to the USB port at the front panel. For
best performance, especially of HD content, we advise to use Hard Disk drives USB 2.0. These must be
formatted in FAT32 format, otherwise Record and Timeshift function will not work.
*Not available for Italy and Germany.
6.7.1 Instant recording*
To immediately record a programme, press 4 to start the recording and press 3 to quit. During a
recording it is possible to press pq, or OK and pq to change to another channel on the same
transponder (frequency) only. Also, it is possible to use the 0~9 buttons.
*Not available for Italy and Germany.
6.7.2 Timeshift*
If you want to use the Timeshift function you only need to press 2 in viewing mode. To resume
timeshifted content, press u or 2 again. During the playback you can use the 5 6 or 2 buttons. To stop
the Timeshift mode, press 3 and it will jump to the actual time of the live signal. The function will still
be running in the background and as long you do not switch to another channel it is possible to jump
again to the beginning by pressing 2 again. Also, with tu it is possible to jump in time during Timeshift
modes.
If the channel is changed timeshifted content will only be accessible from the newly selected channel.
*Not available for Italy and Germany.
6.7.3 Timer recording*
There are 2 ways to set a timer:
Programming a record timer via the EPG
The easiest way to record an event is via the EPG. Press the EPG button to open the EPG, then use pq
to select a channel. After that, press tu and use pq to select an event. You can book a record timer by
pressing GREEN button to set a timer for a selected event.
Programming a record timer via the Timer menu
Press the MENU button on the remote control in viewing mode, select in menu System Setup option
Timer. This way you are free to programme 8 timers. For further details about this menu, please refer to
chapter 7.3.5 Timer in the user manual.
*Not available for Italy and Germany.
6.7.4 Playback*
After a recording has been made you will nd a new folder ALIDVRS2 created on your external USB
storage device. Press the MENU button select Media Player.
Inside the Media Player menu the following functions are supported:
pq To select a record event.
OK Starts playback in preview and again in full screen mode.
3 Stops playback
NUMERIC 1~6 Number 1 toggle between the le types, Music, Image, Video and PVR(records).
10

Strong SRT 8215 Specifications

General

Form factor	Extended
Audio system	Dolby Digital Plus
TV tuner type	DVB-T2
Number of tuners	1 tuner(s)
Channels quantity	700 channels
Free-to-air access	Yes
Maximum resolution	1920 x 1080 pixels
Cables included	Power
USB 2.0 ports quantity	1
Connectivity technology	Wired
Input voltage	100 -240 V
Input frequency	50/60 Hz
Power source type	AC
Power consumption (standby)	1 W
Product color	Black

Weight and Dimensions

Depth	100 mm
Width	168 mm
Height	40 mm
Weight	250 g