Strong SRT 8215 - 7.4.1 Playback of Multimedia

7.3.7 OSD Setting
This menu allows you to select long or shorter time for banner which appears after switching channels.
If you like can also select some transparency of menu, to see in background the TV programme.
OSD Timeout: Sets the time after which on screen banners and messages disappear. The
range is 1~10 seconds.
OSD Transparency: To set the OSD transparency from 00 ~ 40% with 10% steps.
7.3.8 Audio Description Setting
Audio Description Service: AD. Set this option to On if you like to have support of an audio track that
describes the content on screen. Useful for the visual impaired.
Use AD as default: Set this option to On if you like to have AD support always if available audio
track that describes the content on screen. Useful for the visual impaired.
Audio Description Volume oset:
Select the volume from the AD audio track.
7.3.9 Other
Here you will nd some special options which you can use or change values if you like.
Options are Channel play type, Beeper, Auto Standby and Time.
Channel Play Type: Here you select what happens if you zap channels Up or Down. Set this
option to Free then during zapping of channels you get only Free to Air
channels. Select Scrambled to see only coded channels or All to see all
channels during zapping of channels.
Beeper: If you switch to On will you hear in Beep tone in Manual scan menu. This helps
you during adjusting your antenna on selected channel to hear that there are
signal levels. If Beep stop then also signal levels are too low or 0%.
Auto Standby: Auto Standby is a new feature that helps you reducing power consumption.
When set to between 1 to 4 Hours, the receiver will switch to standby if it
doesn't receive any commands of the remote control during this time. Set
Auto Standby to O to deactivate the automatic standby function. The default
setting is 3 hours.
7.4 Media Player
The Media Player menu consists of the following submenus: Media Player, PVR Storage Information and
Remove of USB safely.
7.4.1 Playback of Multimedia
This function allows playback of dierent kind of les from the connected USB storage device.
In the Media player menu, select with numeric key 1 on remote between PVR and press OK to show the
recordings you've made. Select Video and press OK to enter this menu to play all kind of video formats.
Select Music to playback les as MP3 formats. Select Image to playback your favourite pictures in JPG or
BMP format.* In this menu Media player and made lot playback functions by using the numeric keys 1~9
on your remote control. These functions are displayed on bottom of this menu. Functions change on
every other selected item or option.
Use the buttons like described below in order to choose functions during the dierent playback modes.
15
English