Struers LectroPol-5 - Page 13

Procedure
CAUTION
The components must be used in the correct quantity as specified below.
ElectrolyteA2
1. Mix ethanol, butoxyethanol and water.
2. Immediately before use, add A2 II - perchloric acid to the A2 I mixture.
Formula A2 I A2 II
90 ml distilled water
730 ml ethanol
100 ml butoxyethanol
78 ml perchloric acid
Chemicals All chemicals are chemically pure, preferably analytical grade. Per cent
is, where no other is stated, weight per cent.
Butoxyethanol Ethylene glycol monobutyl ether,
CH
3
-(CH
2
)
2
-CH
2
-O-CH
2
-CH
2
OH
Ethanol 96% vol CH
3
-CH
2
OH
Perchloric acid 60%, HClO
4
Distilled water H
2
O
Health and Safety
Before mixing, read the MSDS thoroughly for the specific components.
The user must follow the instructions for proper work procedure according to the instruction
manual supplied with the equipment.
Note
The product must be disposed of according to local regulations for dangerous
goods.
ElectrolyteA3
1. Mix ethanol and butoxyethanol.
2. Immediately before use, add A3 II - perchloric acid to the A3 I mixture.
Formula A3 I A3 II
600 ml methanol 60 ml perchloric acid
360 ml butoxyethanol
2 Safety
LectroPol-5 13