Stryker X8000 Service Manual

6
Device Description

e Stryker X8000 Light Source
is a light-generating unit
designed to illuminate surgical sites during endoscopic
applications.

e X8000 uses a
300-watt xenon bulb to
generate light, which it delivers to the surgical
site via a
fi
beroptic light cable.

e X8000 is compatible with all Stryker light cables, and,
with the proper light cable and adapters, can connec
t to any
fl
exible or rigid endoscope.

e X8000 is equipped with Electronic Sc
ope Sensing
T
echnology (ESST), a spe
cial safety feature that
helps
prevent accidental burns caused by a
light cable that is
not connected to the sc
ope. When operated with an ESST
light cable, the X8000 senses when the scope and the light
cable are separated and places
the light source in Standby
mode. In Standby mode, the
X8000 will reduce
light output
to a minimum, preventing the
light cable from generating
excessive heat.
Technical Specifications
Electrical
Primar
y:
100
–
120
V
AC,
50/60
Hz,
450
W
220 – 240VAC, 50/60 Hz, 450 W
Fuses
(2):
5.0A,
250V
Dimensions
Height:
4.75˝
(12.1
cm)
Width:
12.5˝
(31.8
cm)
Depth:
16.8˝
(42.7
cm)
W
eight:
16.0
lbs
(7.3
kg)
Fiberoptic Cable Range
2 – 6.5 mm diameter
Bulb
Type:
300
W
att
Xenon
(Elliptic
al)
Life:
Approximately
500
hours
Operating Conditions
10 – 40°C
30 – 75% Relative Humidity
T
ransportation and
Storage
-20 – 50°C
10 – 75% Relative Humidity
700 – 1060 hPa
Classi
fi
cations and Approvals
Complies with medical safety standards:
•
IEC
60601-1:200
5
•
CAN/CSA
C22.2
No.60
1.1-M90
•
UL
60601-1:
2003
Complies with medical EMC standard:
•
IEC
60601-1-2:20
01
Class 1 Equipment
Type CF applied parts
W
ater Ingress Protection, IPX0
— Ordinary
Equipment
Continuous Operation
Patent Protection
U.S. #5,850,496; 6,110,107; and 6,689,050.
Other patents pending.

Stryker X8000 Specifications

General

Brand	Stryker
Model	X8000
Category	Medical Equipment
Language	English