8 EN/09.2017/G44 © STULZ GmbH – all rights reserved
cybercool indoor chiller original instructions
2. Transport / Storage
2.1 Delivery of units
Stulzchillerunitsaremountedonpalletsandpackedseveraltimesinplasticlm.
NOTICE
Version A:
Version G, GE:
The refrigerant circuit is filled with nitrogene up to
atmospheric pressure.
The refrigerant circuit is filled with refrigerant rea-
dy for use.
Construction of protec-
tive covering:
(frominsidetooutside)
The following information can be found on the packing:
1.Neopolenecushioning
2.Shrinklm
3.Additionalboardincon-
tainer shipments
1)Stulzlogo
2)Stulzordernumber
3)Typeofunit
4)Packingpiece-contents
5)Warningsymbols
alsouponrequest
6)Grossweight
7)Netweight
8)Dimensions
9)Customerordernumber
10)Additionalcustomer
requirements
NOTICE
Whendeliveryisaccepted,checktheunitagainstthedeliverynoteforcompletenessand
forexternaldamageandrecorditontheconsignmentnoteinthepresenceofthefreight
forwarder.
•Thedeliverynotecanbefoundontheunitwhendelivered.
•Theshipmentismadeexworks,incaseofshipmentdamages,pleaseassertyourclaimtowardsthecarrier.
•Hiddendamageistobereportedinwritingwithin6daysofdelivery.
2.2 Transport
DANGER
Mortal danger by crushing
A defective lifting device can lead to the uncontrolled fall of the unit.
Donotstayundersuspendedloads!
TheStulzunitscanbemovedbyliftingdeviceswithbeltsorropes.
•xthebeltsorropesatthepallet,
•protecttheupperunitedgesbywoodenlathsormetalbracketsinsuchawaythattheycouldnotbecaved
in.