Stulz CyberCool - 2.3 Storage

9 © STULZ GmbH – all rights reserved EN/09.2017/G44
cybercool indoor chiller original instructions
NOTICE
Risk of distorting the frame
Nevermovetheunitonrollersandnevertransportitonaforkliftwithoutpallet.
2.3 Storage
Ifyouputtheunitintointermediatestoragebeforetheinstallation,thefollowingmeasureshavetobecarried
out to protect the unit from damage and corrosion:
• thestoragepointmustnotbeexposedtodirectsunlight.Observethestorageconditionsinthechapter
“Application limits“.
• storetheunitpackagedtoavoidtheriskofcorrosion.
• makesurethatthewaterconnectionsareprovidedwithprotectivehoods.
You can move the unit still packaged on the pallet with a fork lift.
•takecarethatthecentreofgravityiswithintheforksurface.
•takecarethattheunitisinanuprightpositionatthetransport.