Subaru 2011 Impreza - Page 247

Black plate (252,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
5-60 Audio
! Phone setup
! Setting pair phone
Refer to “Preparation for using the Hands-
free system” F5-50.
! Selecting phone
To select the registered cell phone for
connecting to the in-vehicle equipment,
perform the following procedure.
1. Select the “SELECT PHONE” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by operating the
“TUNE/TRACK/CH” dial or saying the
voice tag.
3. Select the “CONFIRM” menu. “SE-
LECTED” is displayed, the selected cell
phone is con nected to the i n-vehicle
equipment and the mode changes to the
“PHONE SETUP” mode.
! Changing the voice tag of the cell
phone
1. Select the “CHANGE NAME” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by operating the
“TUNE/TRACK/CH” dial or saying the
voice tag.
3. Register the voice tag. For details,
refer to “ Preparation for using the Hands-
free system” F5-50.
! List phones function
The cell phone voice tags saved in the cell
phone list are spoken by using the list
phones function.
1. Select the “LIST PHONES” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Registered cell phones are displayed
on the saved side. While displayed, if the
“TUNE/TRACK/C H” dial is turned, the
next registered cell phone is displayed.
Press the ON hook button
to close the
Hands-free menu.
3. If the “TUNE/TRACK/CH” dial is
pushed and a cell phone is selected,
“SELECTED” is displayed. Push the talk
switch
and say one of the following
commands.
. “SELECT PHONE” to connect the
selected cell phone
. “CHANGE NAME” to change the voice
tag
. “DELETE” to delete the selected cell
phone from the list
. “GO BACK” to go back to the “PHONE
SETUP” mode
! Setting passkey
1. Select the “SET PASSKEY” menu.
After the currently set passkey is dis-
played, a new passkey can be entered.
2. Input the new passkey by operating
the “TUNE/TRACK/CH ” dial or saying the
passkey.
3. Select the “CONFIRM” menu. The new
passkey is dis pla yed, the passkey i s
changed and the mode changes to the
“PHONE SETUP” mode.
! Deleting registered cell phone from
the list
1. Select the “DELETE” menu.
2. Select a cell phone to be deleted by
operating the “TUNE/TRACK/CH” dial or
saying a voice tag.
3. Select the “CONFIRM” menu. “DE-
LETED” is displayed, the data is deleted
and the mode changes to the “PHONE
SETUP” mode.
! System setup
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select “GUIDANCE VOL” by operating
the “TUNE/TRACK/CH” dial.
2. Set the guidance volume by operating