Black plate (253,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
the “TUNE/TRACK/CH” dial.
! Initializing the registered data
To initialize the registered data, perform
the following procedure.
1. Select “INITIALIZE” by operating the
“TUNE/TRACK/CH” dial.
2. Select “CONFIRM” by operating the
“TUNE/TRACK/CH” dial. First “PLEASE
WAIT ” , then “INITIALIZED” is displayed.
The registered data is initialized and the
mode changes to the last mode.
! Setting language
To set the language, perform the following
procedure.
1. Select “SEL LANGUAGE” by operat-
ing the “TUNE/TRACK/CH” dial.
2. Select the desired language by oper-
ating the “TUNE/TRACK/CH” dial.
Audio 5-61
5
To Next Page
