Black plate (181,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
the “ /SET” switch toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
If the setting is not available, the following
notification will be displayed for approxi-
mately 3 seconds. For more details,
contact a SUBARU dealer.
! Interior light off delay timer setting
1. Perform the preparation steps accord-
ing to “Preparation for car settings” F3-56.
2. Operate the “ ” or “ ” switch to
select the “Interior Light” item, and then
pull the “
/SET” switch toward you.
3. The current setting is displayed. Pull
the “
/SET” switch toward you to enter
the selection mode.
Instruments and controls 3-59
– CONTINUED –
3
To Next Page
Loading...
