Subaru 2012 Impreza - Page 257

Black plate (271,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
5. Select the “CONFIRM” menu.
– Then “STORED” is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial” F5-45.
NOTE
While inputting the phone numbers, if
“GO BACK” (type B audio)/“BS” (type
C audio) is chosen using the “TUNE/
TRACK/CH” dial, the character that was
input last is deleted.
! Registering from call history
1. Select the “CALL HISTORY” menu.
2. Select “OUTGOING” or “INCOMING”
by operating the “TUNE/TRACK/CH” dial.
3. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
4. Perform either of the following proce-
dures.
– Select the “RECORD NAME” menu
by operating the “TUNE/TRACK/CH”
dial.
– Press the talk switch
.
5. Say the name (voice tag) to be
registered.
6. Select the “CONFIRM” menu.
– Then “STORED” is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial” F5-45.
! Registering from redial
1. Select the “REDIAL” menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
3. Select the “STORE” menu.
4. Select the “CONFIRM” menu.
5. Perform either of the following proce-
dures.
– Select the “RECORD NAME” menu
by operating the “TUNE/TRACK/CH”
dial.
– Press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “CONFIRM” menu.
– Then “STORED” is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial” F5-45.
! Registering from call back
1. Select the “CALL BACK” menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
3. Select the “STORE” menu.
4. Select the “CONFIRM” menu.
5. Perform either of the following proce-
dures.
– Select the “RECORD NAME” menu
by operating the “TUNE/TRACK/CH”
dial.
– Press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “CONFIRM” menu.
– Then “STORED” is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial” F5-45.
! Registering speed dial
1. After registering phonebook data, se-
lect the “SPEED DIAL” menu.
2. Press the preset button (from
to
) to which you want to register the
phone number.
NOTE
If the number to be used is already
registered in speed dial, “OVER-
WRITE?” will be displayed.
! List names function
The voice tags registered in the phone-
book are spoken by using the list names
function. To use the list names function,
perform the following procedure.
1. Select the “LIST NAMES” menu.
Audio 5-45
– CONTINUED –
5