Subaru 2012 Impreza - Page 258

Black plate (272,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
5-46 Audio
2. Select the registered data by perform-
ing either of the following procedures.
– Press the talk switch
.
– Operate the “TUNE/TRACK/CH”
dial.
3. After “SELECTED” is displayed, you
can select the following menus.
. “DIAL” to make a phone call
. “CHANGE NAME” to change the name
(voice tag)
. “SET SPD DIAL”/“SET SPEED DIAL”
to set the speed dial
. “DELETE ENTRY” to delete the name
(voice tag) from the phonebook
. “GO BACK” to go back to the menu
mode
NOTE
. After “LIST NAMES” is selected, if
the OFF hook switch
is pushed, the
selected number is called.
. After “LIST NAMES” is selected, if
no operation is performed, the mem-
ories are displayed and voice tags are
spoken. After all memories/voice tags
are displayed/spoken, “END OF LIST ”
is displayed and the mode changes to
the “PHONE BOOK” menu mode.
! Changing voice tag
1. Select the “CHANGE NAME” menu.
2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the voice tag.
3. Select th e “CONFIRM” menu (only
after saying the voice tag).
– Then the selected phone number/
name is displayed.
4. Press the talk switch
.
5. Say the new voice tag.
6. Select the “CONFIRM” menu.
– Then “CHANGED” is displayed.
! Set speed dial
1. Select the “SET SPD DIAL”/“SET
SPEED DIAL” menu.
2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the voice tag.
3. Select th e “CONFIRM” menu (only
after saying the voice tag).
4. Press the preset button (from
to
) to which you want to register the
phone number.
! Deleting the phonebook data
1. Select the “DELETE ENTRY” menu.
2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/T RACK/CH ”
dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM” menu.
– Then “DELETED” is displayed and
the selected phonebook data is de-
leted.
! Deleting the speed dial
1. Select the “DEL SPD DIAL”/“DELETE
SPEED DIAL” menu.
2. Press the preset button (from
to
) to which you want to delete the
speed dial.
3. Select the “CONFIRM” menu.
– Then “DELETED” is displayed and
the selected speed dial is deleted.
! Deleting the redial data
1. Select the “REDIAL” menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
3. Select the “DELETE” menu.