4. Select a number by operating the “ ”
or “
” switch. Then pull the “ /SET”
switch toward you. When “12 h” is
selected, the clock will be set to a 12-
hour display. When “24 h” is selected, the
clock will be set to a 24-hour display.
5. After entering the date and time, select
“Set” by operating the “
” switch and
confirm the setting by pulling the “
/SET”
switch toward you.
6. The system will notify you that the
setting is complete.
! Birthday setting
1. Perform the preparation steps accord-
ing to “Preparation for date setting” F3-
50.
2. Operate the “ ” or “ ” switch to
select the “Birthday” item. Then pull the
“
/SET” switch toward you.
3. Select the item to set by operating the
“
” or “ ” switch. Then pull the “ /SET”
switch toward you.
Instruments and controls/Multi function display
– CONTINUED –
3-51
To Next Page
