6. The system will notify you that the
setting is complete.
! Fuel consumption screen setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-59.
2. Operate the “ ” or “ ” switch to
select the “Cons” item. Then pull the “
/
SET” switch toward you.
3. Pull the “ /SET” switch once more.
4. Select the displayed configuration by
operating the “
” or “ ” switch. Then pull
the “
/SET” switch toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
Instruments and controls/Multi function display
– CONTINUED –
3-61
To Next Page
Loading...
