Instruments and controls/Multi function display
4. Select the preferred item by operating
the “
” or “ ” switch. Then pull the “ /
SET” switch toward you.
If you also want to change the setting for
another location, repeat steps 3 and 4.
5. Select “ Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
! Clock/calendar screen setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-59.
2. Operate the “ ” or “ ” switch to
select the “Clock” item. Then pull the “
/
SET” switch toward you.
3. Pull the “ /SET” switch once more.
3-64
To Next Page
Loading...
