! Lifetime fuel consumption resetting
1. Perform the preparation steps accord-
ing to “Preparation for initialization” F3-
81.
2. Operate the “ ” or “ ” switch to
select the “ Lifetime Fuel Consumption
Resetting” item. Then pull the “
/SET”
switch toward you.
3. The system will prompt a Yes/No
dialogue (“No” is selected first). To reset
the lifetime fuel consumption, select “ Yes”
by operating the “
” switch.
4. Confirm the setting by pulling the “ /
SET” switch toward you.
5. Reconfirmation will be displayed. If
you are sure you want to proceed, select
“Yes” by operating the “
” switch.
6. Confirm the setting again by pulling
the “
/SET” switch toward you.
Instruments and controls/Multi function display
– CONTINUED –
3-83
To Next Page
Loading...
