3. Adjust the balance by pressing “ ”
or “
” button.
4. Adjust the fader by pressing “
” or
“
” button.
5. Select the “Vocal Image Control”
menu.
6. Adjust the balance by pressing “ ”
or “
” button.
7. Adjust the fader by pressing “
” or
“
” button.
! “Speed Volume Control”
The system adjusts to the optimum
volume and tone quality according to
vehicle speed to compensate for in-
creased vehicle noise.
1. Touch the right side button of the
Speed Volume Control function, and se-
lect “OFF”, “Low”,or“High” menu. “High”
comes to have a bigger effect.
2. When select “OFF”, speed volume
control function is cancelled.
! “Graphic Equalizer”
1. Touch the “Set” button of the Graphic
Equalizer function.
2. In this mode, 6 preset equalizer
patterns and 3 customized patterns are
available.
6 preset patterns: “Bass” , “ Tre ble”,
“Acoustic”, “Impact”, “Smooth”, “Flat”
3 customized patterns: “SET 1” - “SET 3”
3. When customizing the equalizer pat-
tern, press one of SET button and then
press “Adjust” button.
Audio/Basic operation
– CONTINUED –
5-15
To Next Page
Loading...
