Black plate (107,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
& Replacing battery of access
key
If the operation of the keyless access
function or the operating distance of the
remote keyless entry system is unstable,
the battery of the access key may be
discharged.
Replace the battery with a new one.
Battery: Button battery CR1632
1) Knob
2) Mechanical key
1. Take out the mechanical key.
2. Wrap a flat-head screwdriver with vinyl
tape or a cloth, and insert it in the gap (A)
to remove the cover.
3. Remove the board in the cover (B).
Place it with the battery side facing
upward.
4. Wrap a flat-head screwdriver with
insulating tape, and insert it between the
battery and the board (B). Take out the
battery as shown in the figure.
Keys and doors 2-23
– CONTINUED –
2
To Next Page
Loading...
