Black plate (32,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
1-6 Seat, seatbelt and SRS airbags
Seat heater (if equipped)
The seat heater is equipped in the front
seats.
The seat heater operates when the igni-
tion switch is either in the “Acc” or “ON”
position.
CAUTION
. There is a possibility that people
with delicate skin may suffer
slight burns even at low tempera-
tures if he/she uses the seat
heater for a long period of time.
When using the heater, always be
sure to warn the persons con-
cerned.
. Do not put anything on the seat
which insulates agai nst heat,
such as a blanket, cushion, or
similar items. This may cause the
seat heater to overheat.
NOTE
Use of the seat heater for a long period
of time while the engine is not running
can cause battery discharge.
& Type A seat heater
1) HI – Rapid heating
2) LO – Normal heating
A) Left-hand side
B) Right-hand side
To turn on the seat heater, push the “LO”
or “HI” position on the switch, as desired,
depending on the temperature.
Selecting the “HI” position will cause the
seat to heat up quicker.
The indicator located on the switch illumi-
nates when the seat heater is in operation.
When the vehicle’s interior is warmed
enough or before you leave the vehicle,
be sure to turn the switch off.
& Type B seat heater
Each seat heater has four levels of
adjustment. To use the heater in the
right-hand seat, turn the “R” adjustment
dial forward until the “
” mark reaches the
desired position. To activate the heater in
the left-hand seat, turn the “L” adjustment
dial forward until the “
” mark reaches the
desired position. Each heater warms the
seat most quickly with the “
” mark on the
adjustment dial in the furthest-forward
position. An indicator light on the adjust-
ment dial for each seat heater illuminates
when that seat heater is activated.
When the vehicle’s interior is warmed
enough or before you leave the vehicle,
always turn the switch off.
To Next Page
Loading...
