Black plate (374,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
11-58 Maintenance and service
surface.
5. Reconnect the electrical connector.
6. To install the bulb to the headlight
assembly, turn it clockwise until it clicks.
7. Install the air intake duct with clips.
(right-hand side)
& Front position light and front
turn signal light
1. Turn the bulb socket counterclockwise
and pull out the socket.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Install the bulb socket by turning it
clockwise.
& Side turn signal light
The bulb is an integral part of the side turn
signal light assembly. If the bulb fails, the
whole side turn signal light assembly must
be replaced. We recommend that you
have the side turn signal light assembly
replaced by your SUBARU dealer if
necessary.
& Rear combination lights
1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.
2. Slide the rear combination light as-
To Next Page
Loading...
