Black plate (327,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
1) Spare fuse
2) FWD connector
3. Put a spare fuse inside the FWD
connector located in the cabin and confirm
that the All-Wheel Drive warning light
“
” illuminates. The All-Wheel-Drive
capability of the vehicle has now been
deactivated.
Always use reliable blocks to prevent the
vehicle from moving . Never race t he
engine or brake suddenly.
NOTE
After that maintenance and inspection
have been performed, remove the
spare fuse from the FWD connector in
order to reactivate All-Wheel Drive.
Make sure to restore t he removed
spare fuse in the spare fuse holder
located in the engine compartment.
Engine hood
To open the hood:
1. If the wiper blades are lifted off the
windshield, return them to their original
positions.
2. Pull the hood release knob under the
instrument panel.
Maintenance and service 11-11
– CONTINUED –
11
To Next Page
Loading...
