Black plate (273,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
desired speed, press the “SET/COAST”
button once. Now the desired speed is set
and the vehicle will keep running at that
speed without depressing the accelerator
pedal.
& Cruise control indicator light
The cruise control indicator light illumi-
nates when the ignition switch is turned to
the “ON” position and turns off after
approximately 3 seconds.
The light illuminates when the “CRUISE”
main switch is pressed.
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate th e cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. If this indicator light and the mal-
function indicator lamp “
” flash
simultaneously during driving, we re-
commend that you have the vehicle
checked by your nearest SUBARU
dealer.
& Cruise control set indicator
light
The cruise control set indicator ligh t
illuminates when the ignition switch is
turned to the “ON” position and turns off
after approximately 3 seconds.
The light illuminates when vehicle speed
has been set.
Starting and operating 7-41
7
To Next Page
Loading...
