Black plate (111,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
mended that you have the battery re-
placed by your authorized SUBARU deal-
er. If you have to replace the battery by
yourself, use utmost care that no dust and
water may enter the transmitter.
CAUTION
. Do not let dust, oil or water get on
or in the transmitter when repla-
cing battery.
. Be careful not to damage the
printed circuit board in the trans-
mitter when replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; chil dren could
swallow them.
. Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
type.
. Batteries shall not be exposed to
excessive heat such as sun-
shine, fire or the like.
! Type A
1. Remove the screw on the transmitter
case.
2. Open the case using a flat-head
screwdriver.
3. Remove the screw on the battery
case.
4. Open the case.
Keys and doors 2-27
– CONTINUED –
2
To Next Page
Loading...
