Black plate (196,1)
一般Model "A8140GE-A" EDITED: 2007/ 12/ 13
5-8 Audio
Type C audio:
Choose the desired settings for each
mode by turning the sound control dial.
The control function returns to the tune/
track/channel control mode after approxi-
mately 5 seconds.
! SVC setting
SVC (Speed Volume Control) is a function
that automatically adjusts the volume
according to the vehicle speed. As the
vehicle speed increases, the audio vo-
lume automatically increases to match the
vehicle speed, in order to create a
pleasant listening environment even as
the driving noise increases. The amount of
this automatic volume change can be set
in the range from OFF to 2. The initial
setting is OFF.
! BEEP setting (type A and C audio)
A beep sound (o peration sound) that
occurs when the audio system is operated
can be set ON/OFF. The initial setting is
ON.
! SRS CS Auto setting (type B audio)
SRS CS Auto can be set ON/OFF. When
this setting is ON, “
” is displayed on the
screen.
NOTE
SRS CS Auto creates a 5.1ch equiva-
lent surround field using 7 speakers
that are installed in the vehicle.
SRS CS Auto features:
1) Sound originating from door mount
speakers can be heard at ear level
(built in SRS FOCUS effect).
2) Ultra rich bass sound can be ob-
tained from stan dard door mount
speakers and a sub-woofer (built in
SRS TruBass effect).
3) Surround sound can be obtained
from 2-channel stereo sources such as
CD, MP3 and FM (built in SRS Circle
Surround II effect).
4) SRS CS Auto can position the
center channel image in the center of
the vehicle’s windshield. This elimi-
nates the need for a center speaker
(built in SRS Circle Surround II phan-
tom center and SRS FOCUS effects).
CS Auto, TruBass, FOCUS, Circle Sur-
round-II, SRS and “
” symbol are
trademarks of SRS Labs, Inc.
CS Auto technology is incorporated
under license from SRS Labs, inc.
! REG setting
This function prevents the radio from
selecting local stations during AF
searches. It is possible to turn the function
ON/OFF by selecting the “REG” setting.
! VOL ADJUST setting (type A audio)
It is possible to preset the volume that the
set will use when it breaks into playback
with broadcasts of traffic information,
news bulletins and emergency announce-
ments.
If you select the “VOL ADJ” setting, the
preset break-in volume can be adjusted.
NOTE
. If the preset break-in volume is
lower than the current volume when
break-in reception occurs, the volume
does not change to the preset break-in
level. (It remains at the current level.)
. When break-in reception finis hes,
the volume returns to the original level.
To Next Page
Loading...
