SUMAVISION EMR Operation Introduction
13 /53
Fig. 4-2 Assembly cabinet for EMR
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
The device can be installed in any plug-in frame of the assembly cabinet.
However, the general principle for arranging the location of the device is that the
connection between various stand-alone devices should be arranged neatly on the
assembly cabinet in accordance with the flow of signal.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
4.4 Debugging
Preparations before configuration:
The device should be stably fixed on the cabinet, and the operation environment is
normal.
The device should be connected to the ground very well.
Check whether input video and audio signals are correct on the encoder side.
The device has been connected to the power supply correctly.
If network management is needed to control devices, please connect the device with
the computer.
Device power-on inspection:
Indicators of the device display normal.
Standby interface is displayed on the LCD of the device.
Device keys can respond normally.
The fans of the device can operate normally without harsh noise.
No abnormal sounds and offensive smell.
To Next Page
Loading...
Need help?
General